To Next Page
V
Vanessa PerezJul 26, 2025
How to fix streaks while cleaning with Kärcher Ultrasonic Jewelry Cleaner?
- RramirezanthonyJul 26, 2025
If your Kärcher Ultrasonic Jewelry Cleaner is leaving streaks while cleaning, try these steps: * Clean the pull-off lip. * Reverse the pull-off lip: Pull the silicone squeegee to the side, wet it with water or detergent, and slide it back in the holder in reverse order. * If both edges are worn, replace the pull-off lip with a new silicone squeegee, using the same replacement method. * Adjust the amount of cleaning solution you are using.
General
Weight and Dimensions
