How To Use Your Memory Keys
•
If the feature assigned to the
Primary
Function
of a key is to be activated, the key should be
pressed until the
first
“beep”
. If the feature
assigned to its
Secondary
Function
is to be
activated, then the key should be pressed until
the
second
“beep”.
•
The
LEDs
of the
Memory Keys
, operate
only
for the
Primary
Function
of each key lighting
up red.
•
The features may be activated in two ways:
a. By lifting the handset and then pressing
the relevant
Memory Key
, or
b. By pressing the relevant
Memory Key
without lifting the handset; the handsfree
mode and the
Memory Key
’s assigned
feature are automatically activated.
According to the programmed function, the
Memory
Keys
may be used as follows:
a)
Extensions
: You may;
-
Call an extension by pressing the respective
Memory Key.
-
Call an extension, while receiving busy or ring-
back tone, (after having called another
extension) by pressing the respective
Memory
Key
.
-
Make an
Inquiry Call
to another extension,
while you have a call on hold, by pressing the
respective
Memory Key.
-
The LED of an extension key is:
ON (Red) : Busy.
OFF : Idle
BLINKING (Red&Slow) : Ringing
BLINKING (Red&Fast) : Parked
BLINKING (Red&Green) : Left off-hook
b) Lines:
You may;
-
Access the line you wish by pressing the
respective
Memory Key
.
-
Park the call on the line, or retrieve a
previously parked call, by pressing the
respective
Memory Key
.
To Next Page
Loading...
