INSTRUCTION MANUAL
flip
big
Please read this manual carefully before using the calendar clock.
NOTE:
1.if the calendar component sheets ever slip off the wheels, follow
the two simple steps of repair:
a.open the unit case by unscrewing the five screws; and
b.put the loosen sheet(s) back to the wheel holes.
2.DO not use corrosive solution for cleaning any surface of the
unit. Instead use alcohol, tooth paste, soap, or detergent for
cleaning.
3.keep the unit from heating duct, fire place, wet areas or direct
sunlight exposure.
4.do not drop the unit and avoid heavy impacts.
C.Adjustment of automatic calendar:
1.turn off the system power. Adjust the calendar in the following
sequences: AM/PM, WEEK, DAY and MONTH.
2.at the turn of PM, there will be a stand-by signal.
3.at the turn of AM, the date is moved forward one day.
4.adjust the week, day and month next, in that order, by turning
the knobs anti-clockwise.
5.turn on the system power after completing the adjustment
6.on February 29 of the leap year, turn off the power system.
Apply manual adjustment to the calendar to show FEB.29. Turn
on the power the next day, March 1. The automatic system will
resume function.
7.to test the automatic calendar system, follow diagram C, with
system power turned “ON”.
Patent numbers
USA 4694597, 5274616
UK 2181279, 2266977
CHINA 38201, 54537, 136997
TAIWAN 31158, 31158-1, 31158-2, 74085
KOREA 96412
To Next Page
Need help?
General