Karma BLAZER - Page 82

82
20.7.2 Metal surfaces
For normal cleaning it is best to use a soft cloth/sponge, hand warm water and
a mild detergent. Wipe down carefully with a cloth and water, and dry off.
Remove scuff marks from semi-matt surfaces with soft wax (follow
manufacturer’s instructions).
Remove scuff marks and scratches from shiny surfaces using car polish,
either liquid or paste. After polishing, apply soft car wax to restore the original
surface gloss.
20.7.3 Plastic covers
For normal cleaning, wash plastic surfaces with a soft cloth, mild detergent
and hand warm water. Rinse thoroughly and dry with a soft cloth. Do not use
solvents or abrasive kitchen cleaners.
Never use aggressive chemical cleaner or cleaning fluids. These will
damage the surface and structure of the material.
Never use a sponge with a hard surface. This will damage the surface and
structure of the material.
Never use a high-pressure water hose or steam cleaner. This will damage
the surface and structure of the material and could cause electronic failure.