EasyManuals Logo

Karma RDM 8A User Manual

Karma RDM 8A
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
76
Se desiderate posizionare il vostro
diffusore su supporto a treppiede,
utilizzate l’apposito bicchierino posto
sulla parte inferiore. Il diametro è
standard(35mm).
Terminati i collegamenti, regolate
tutti i volumi dell’amplicatore sul
minimo cioè tutti ruotati in senso
antiorario. Collegate il cavo di
alimentazione alla presa(11) e quindi
alla rete elettrica.
Accendete l’amplicatore tramite il
tasto POWER(10). Il relativo led(8) si
illuminerà e ne indicherà l’avvenuta
accensione.
Qualora posizionando il tasto(10)
su ON il led(8) rimanesse spento ed
il diffusore non funzionasse, prima
di contattare l’assistenza tecnica,
scollegate il cavo di alimentazione
e vericate l’integrità del fusibile di
protezione contenuto nella presa di
alimentazione(12). Eventualmente
sostituitelo con uno di uguale valore
amperometrico. Durante l’utilizzo,
le alette di raffreddamento(18)
potrebbero diventare molto calde.
Evitate di toccarle per evitare il
rischio di ustioni o scotatture.
Attivate l’eventuale apparecchiatura
che fornisce il segnale audio. Il
segnale verrà amplicato. Il volume
di ogni segnale amplicato potrà
If you wish to place your speaker
on a tripod stand, please use the
mount hole on the bottom. It has a
standard 35 mm diameter.
Once made the connections, please
put all the amplier volumes at their
minimum position (completely turned
anti-clockwise). Connect the power
cord to the socket (11) and then to
the mains (230V)
Turn on the amplier through the
POWER button (10). The power led
(8) will light up to indicate that the
speaker is on. If the button (10) is in
ON position and the speaker doesn’t
work, before contacting the technical
service, disconnect the power cord
and check if the protection fuse
of the power socket (12) is ok. If it
is blown replace it with one of the
same amperage. During use the
cooling wings could get very hot.
Don’t touch them to avoid the risk of
burning yourself.
Turn on the xture providing the
audio signal. The signal will be
amplied. The volume of each
amplied signal can be adjusted

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Karma RDM 8A and is the answer not in the manual?

Karma RDM 8A Specifications

General IconGeneral
BrandKarma
ModelRDM 8A
CategorySpeakers
LanguageEnglish

Related product manuals