EasyManua.ls Logo

Karma SNOW 601 - Operation; After Using

Karma SNOW 601
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ulteriori informazioni su: www.karmaitaliana.it
76
ENGLISH
Beforearranginganyconnection,besuretounplugthe
devicefrompowersource.Allconnectionsmustbe
madewiththextureo.
1. Install the xture next to a power source, in a location with adequate ventilation, far from
moisture and heat sources and from children’s reach. Please consider that peolple have
to stay at a distance of at least 1 mt from the snow output nozzle. To rig the product you
can use the included bracket and adjust the direction through the knobs.
2. Connect the device to the 230V power source, by putting the plug (6) in a common
domestic electric socket . The xture incudes a wireless remote control, whose receiver is
to be connceted to the socket(5).
3. Fill 90% of the tank after unscrewing the cap(1) and using the specic fuid for smoke
machines (mod. LIQ SN5). The small window on the back (3) allows to check the level of the
liquid in the tank. Warning: the use of wrong liquids can damage beyond repair the xture.
OPERATION
Just use the button on the back (4) to switch on the xture and use the touch(B) on the remote
control. To stop the e󰀨ect use button(A)
We suggest not to use the machine for a too prolonged time (alternating some pauses to
operation) in order to avoid wearing out too much the internal components and extend the
xture’s life as much as possible. To get the best result we suggest to install the xture in
elevated position and to combine also a small fan that will increase the output range and
accentuate the snowing e󰀨ect.
WARNING:
The articial snow, after faling on the ground, will dissolve making the surface wet and slippery..
Pay attention not tp slip to avoid to harm yourself. Also be careful that the oor or other objects
are not damaged by moisture.
AFTER USING
We suggest, after each use, to remove carefully all the uid left in the tank and make a cleaning
cycle with distilled water. When you don’t use the machine, in fact, the liquid left in the tubes
and in the pump tends to dry up and get solid, obstructing the tubes and damaging the xture.
Disconnect the machine and put it away from children’s reach.

Related product manuals