Need help?Do you have a question about the Karmek KK IDRO and is the answer not in the manual?
Essential safety guidelines and precautions to follow during installation and operation for user protection.
Step-by-step guide for the initial start-up and lighting of the boiler by a qualified technician.
Instructions on how to start and operate the boiler after initial filling and setup.
Indicates an issue with the fumes temperature probe, requiring checks and potential replacement.
Signals a failure in the boiler's ignition sequence or failure to reach operating temperature.
Indicates that the flame has extinguished during operation or fumes temperature is too low.
Alerts to a loss of power supply, with the boiler attempting to restart upon restoration.
Triggers when the safety thermostat detects a temperature exceeding its threshold, stopping operation.
Troubleshooting steps for power loss or connection issues affecting the display and controls.
Guidance on diagnosing and resolving issues with the remote control's performance.
Steps to resolve problems related to the boiler failing to ignite correctly.
Troubleshooting for issues preventing the automatic ignition sequence of the boiler.
Solutions for common blockages, often related to grate cleaning or pellet accumulation.
Addresses issues with pellet feeding, including screw obstructions or empty tanks.
Diagnosing and resolving problems causing premature jamming or inconsistent combustion.
Troubleshooting for smoke detection, bad combustion, or fan malfunctions causing shutdowns.
To Next Page
General