EasyManua.ls Logo

KARPO Fly Fantom Extralight 3 - Speed; Cockpit; Adjusting the Harness before Flying

KARPO Fly Fantom Extralight 3
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Before you start ying
Cocpit – pilot desk
Cockpit is a part of the harness. The right
side of the cockpit is sewn rmly to the
harness. Left side you will attach with two
hooks. Thanks to the two hooks system that
tighten the trigger system, the cockpit will
have the right position.
Pay great attention to adjusting the harness. We recommend that you adjust
the harness before the rst start, as follows. Dress up all clothes you y
in include shoes. Pack all things you usually take with you into the harness and
then sit in the harness and adjust the cocoon and side straps. This adjustment
should be as accurate as possible. Fine tuning can be completed during
the rst few ights.
The shoulder straps serve for optimal adjustment of the harness to the height
of the pilot. The shoulder strap is tightened by the plastic D buckle
downwards. If we need to release the shoulder straps, grasp the short strap
and pull the shoulder strap upwards to allow it.
Shoulder straps
The FANTOM EXTRALIGHT 3 harness has simple side adjustment. The seat
position is adjusted by the back straps.
Side straps
Speed
page 6
www.karpoy.com
The FANTOM EXTRALIGHT 3 is standardly equipped with two-speed ultra-light
speed.
Speed rst passes through the metal ring on the side. Then drag the speed bearing
pulley and then take it through neoprene opening. Put the hook and adjust
the length of the speed.
Speed installation