KAS KAS-310-DK User Manual

!
KAS-302 E Keypad Programming Instructions
The KAS-302 E Keypad vandal resistant proximity card and keypad access
control unit suitable for external applications. The unit accepts up to 999
users and provides entry via the use of proximity cards and/or pin codes.
Equipment provided
The following is provided as part of an Electric Strike Bundle Kit:
Additional Equipment Required
Electric lock Strike Mechanism!Fail Safe (power to lock) or Fail Secure
(power to open)
Power Supply with Backup Battery 12VDC (From a Regulated Power
Supply)
Request to Exit (REX) Button !Normally Open Type-Switch is closed when
pressed.
Technical Specification
Electrical Characteristics!
Operating Voltage
12VDC From a Regulated Power Supply
Input current:
Not including attached device
Standby: 60mA!
Max: 130mA!
Outputs:!
Lock Strike Relay!›
Auxiliary Relay!›
Lock Strike Control Output
Auxiliary Control Output
From C, 5A
From C, 5A
Collectors open output (25mA)
Collector Open Output (25mA)
Built-in Proximity Reader
Read Range
65mm!
Reader
ASK at 125kHz!›
Compatible Cards
ALL 26-Bit EM Cards
Environmental Characteristics!›
Operating Temperature
0 to 5%(Non Condensing)
Suitable for outdoor use
Mechanical Characteristics!
Dimensions:
120L*76W*27Hmm
Weight:
610g
User Guide
KAS-310-DK Keypad

KAS KAS-310-DK Specifications

General

Interface	USB
Power supply	USB powered
Operating temperature	0°C ... +50°C
Type	Keypad
Operating System Compatibility	Windows

Summary

KAS-302 E Keypad Programming Instructions

Equipment Provided

Lists items included in the Electric Strike Bundle Kit.

Additional Equipment Required

Details necessary external components for the access control system.

Technical Specification

Electrical Characteristics

Specifies voltage, current, and output capabilities of the keypad.

Built-in Proximity Reader

Details the read range, frequency, and compatible card types.

Environmental Characteristics

Outlines operating temperature and suitability for outdoor use.

Mechanical Characteristics

Provides dimensions and weight of the keypad unit.

Keypad Features and User Management

Core Features

Lists built-in readers, PIN entry, auxiliary I/O, modes, LEDs, and tamper alerts.

User Lever Types

Defines three user levels: Normal, Secure, and Master, with access privileges.

Mounting the Keypad

Installation Location and Wiring

Guides on selecting the mounting spot and passing wires through openings.

Operation and Access Modes

User Types and Code Usage

Explains primary/secondary codes and user roles (Normal, Secure, Master).

Access Mode Descriptions

Describes Normal Mode (default) and Secure Mode access requirements.

Mode Switching and Recovery Procedures

Changing Operational Modes

Step-by-step guides to switch between Normal and Secure modes.

Keypad Sounds and Light Indicators

Defines sounds and LED indicators for various operational states.

Lost Code Recovery

Procedures for recovering lost Program Codes and Secure Codes.