Kasanova MC616 - Cleaning and Maintenance; Cleaning the Main Unit; Cleaning Filters; Cleaning the Rolling Brush

22
CORDLESS CYCLONIC VACUUM CLEANER
CLEANING AND MAINTENANCE
To clean the main unit
1. All the cleaning operaons must be done aer disconnecng the power
supply.
2. Clean the dust tank oen and aer each use.
3. Make sure the baery is removed before cleaning.
4. Use a damp cloth to clean the item. Prevent the liquids from entering into
the main unit to avoid any damage to the device.
To clean lters
1. If necessary, the coon lter can be washed under running water. Wait
unl the lter is totally dried before reassembling it. Not washing machine
and dryer safe.
2. Take o all the remains of the stainless steel lter aer every use, by a bru-
sh. You can clean the stainless steel lter with a damp and so cloth.
To Clean rolling brush
Open the brush slot by turning the lock in counterclockwise direcon. To rele-
ase the brush, li the cover and take o the rolling brush; then clean it from
hair and dirt.
Locker slot of brush