13
WIRELESS VACUUM CLEANER
REMOVE AND WASH THE FILTRATION SYSTEM
Air intake
Arrows
Filter elements
(gure9)
Open direction
Dust cup Filter net Seal groove
Filter Cotton
Main engine
Sealing element (gure10)
Operation:
Fix the motor housing and open the dust cup according to the arrow direction,
as shown in gure 9. Remove the lter cotton and the lter net from the
dust cup, as shown in gure 10. The parts can be washed and dried. Then
replace the parts in the opposite direction as they were removed. For the rst
installation of the lter, the direction of the arrow has to be roughly consistent
with the direction of the main engine air inlet, as shown in gure 11. Then aim
accurately at the notch of the lter frame and the protruding part of the dust
cup. Do not forget to install the sealing element.
It is recommended to clean the lter cotton and the lter net every time you
empty the dust cup.
Special reminder: Except dust cup and dust cup internal parts, the rest of the
parts are prohibited to clean!
To Next Page
Loading...
