Kasia Citycoco - User Manual

Questions and Answers

P
porterbradleyAug 4, 2025
Why does my Kasia Citycoco Scooter's continuous range decrease quickly after charging?
- D
  dana33Aug 4, 2025
  Several factors can affect the continuous range of your Kasia Scooter after charging. The tyre pressure might be insufficient, so ensure the tyre is sufficiently pressurized. The charging may be insufficient, or the charger could be faulty, so completely charge it or replace the charger. The battery could be aged or damaged, requiring a replacement. Lastly, uphill riding, strong winds, frequent braking, or high loads can reduce range; this should normalize with different riding conditions.
D
Dr. Jeffery YoungAug 10, 2025
What to do if the motor of my Kasia Scooter doesn’t work after connecting the power supply?
- J
  Jessica RojasAug 11, 2025
  If the motor of your Kasia Scooter isn’t working after connecting the power, it might be due to a loose battery connecting line, which needs repair and reconnection. Another possibility is a damaged speed regulation rolling handle, which requires a dealer replacement. Also, the motor output line plug-in component could be loose or damaged.
R
ralph66Aug 18, 2025
How to fix the speed regulation on my Kasia Citycoco if it fails?
- N
  nathancampbellAug 18, 2025
  If the speed regulation fails or the maximum speed is reduced on your Kasia Scooter, it could be due to a low battery voltage; completely charge the battery. Alternatively, the speed regulation rolling handle might be damaged or its spring could be stuck or failing, in which case you should find a dealer and ask for a replacement.
N
nathan56Aug 26, 2025
What to do if my Kasia Citycoco charger can’t be recharged?
- T
  Thomas OlsonAug 26, 2025
  If your Kasia Scooter charger can’t be recharged, check if the charger socket or the connection between the plug and the socket is loose; if so, fasten it. Another cause might be a burnt-out fuse in the battery box, which requires replacement. Also, the battery set wiring could be loose; properly weld the connecting line.