Kask ZEN Series User Manual

USE AND CARE BOOKLET
ZEN FULL FACE VISOR
FF - FF AIR - PM - MM
ACTIVITIES INVOLVING THE USE OF THIS EOUIPMENT
FOR YOUR OWN ACTION AND DECISIONS.
BEFORE USING THIS EOUIPMENT. YOU MUST:
- READ AND UNDERSTAND ALL INSTRUCTIONS FOR USE.
- GET SPECIFICTRAINING IN ITS PROPER USE.
- BECOME ACQUAINTED WITH ITS CAPABILITIES AND LIMITATIONS
- UNDERSTAND AND ACCEPTTHE RISKS INVOLVED
FAILURE HEED ANY OF THESE WARNINGS
MAY RESULT IN SEVERE INJURY OR DEATH
WARNING
ANSI

Kask ZEN Series Specifications

General

Brand	Kask
Model	ZEN Series
Category	Protection Device
Language	English

Summary

Safety Warnings and User Responsibility

User Prerequisites

Before use, understand instructions, get training, and accept risks for safe operation.

General Information

Product Certification and Use

Details on CE certification, compliance with standards EN 1731/EN 166, and ANSI Z87.1.

Regulatory Information

Standards and Symbol Explanations

Information on mesh protector limitations, high-speed particle protection, and symbol meanings.

Instructions for Use

Fitting the Visor to the Helmet

Step-by-step guide for attaching the visor support and visor to KASK helmets using adapters.

Cleaning and Maintenance

Instructions for cleaning the visor using water and neutral soap, and avoiding harsh chemicals.

Storage and Transport

Guidance on storing the visor away from UV rays and heat, and basic transport recommendations.

Product Lifespan and Replacement

Information on the visor's maximum lifespan and conditions requiring replacement due to damage or age.

Warranty and Performance Specifications

KASK Warranty Policy

KASK guarantees against material/manufacturing defects for 3 years, excluding normal wear and misuse.

EN166 Performance Indices

Details on optical class, mechanical resistance (BT), molten metal protection (9), and mist resistance (N).

EN170/EN172 Range Numbers

Information on UV filters (EN 170) and solar filters (EN 172) with corresponding graduation numbers.

EN1731 Performance and Light Transmission

Field of use (S) for EN1731 and light transmission data for ZEN PM (45%) and ZEN MM (54%).