Do you have a question about the Kathrein EXI 01 and is the answer not in the manual?
Cascadable | Yes |
---|---|
Product color | Gray |
Number of inputs | 5 inputs |
Protection class | II |
Number of outputs | 8 outputs |
RF connector type | F |
International Protection (IP) code | IP30 |
Output frequency range (satellite) | 950 - 2150 MHz |
Output frequency range (terrestrial) | 2 - 862 MHz |
Input voltage | 230 V |
Input frequency | 50/60 Hz |
Operating temperature (T-T) | -20 - 55 °C |
Depth | 42.5 mm |
---|---|
Width | 295 mm |
Height | 148 mm |
Modem for the Kathrein-IP over Koax system (K-LAN) based on IEEE 1901.
Enables home network over coax, supports >500-Mbit throughput for multiple HD streams with QoS.
Integrated diplexer for signal isolation, high screening, and 128-bit AES encryption for private networks.
Features Eco Power Mode, automatically switching to stand-by to conserve energy.
Energy-efficient plug-in power supply unit for power supply, e.g. for operation at a PC.
Screened network cable 1.5 m Cat 6A.
High-pass filter EXI 90 BN (20510062) for use with multi-switches not from the EXI range.
Software EXI 700: Displays the visible modems on a network (download from: www.kathrein.de).
EXI 30 (article no.: 21110024): Outlet remotely fed from the SAT port, with optimum selection for data and RF signals.
If using switchable LNB or multi-switch with >50mA consumption, use the provided power supply unit.
When connecting to a PC, screw an EMK 03 terminating resistor to the unused output.
Covers warranty voiding, installation in dry areas, avoiding combustible materials, and ventilation.
Specifies connector types, maximum excess length, and clamping torque for coaxial cables.
Connecting the modem, power supply, Ethernet cable, and initial LED indications.
Procedure to delete the network key and establish a private network connection between modems.
How to reset the modem to factory settings and its automatic stand-by mode behavior.
Information on operating the EXI 01 with EXI 3508 multi-switch and conventional multi-switches.
Explanation of the status indications for Power LED and Coax/Link LED.
Description of the actions triggered by the Pairing and Reset buttons.
Illustrations showing connection examples for receivers, laptops, and PCs.
Symbolic representation of connecting a twin receiver and remote feed to the modem.
A symbolic representation of a home network setup using the EXI 01 modem and other components.
Common problems with the 'Coax/Link' LED and their possible causes and solutions.
Detailed technical data including input/output, frequency ranges, power consumption, and dimensions.
Specifications for the included power supply unit, including input voltage, output current, and power.
Overall dimensions of the EXI 01 device, showing front and side views.
Drilling template with dimensions for wall mounting the EXI 01.
Information regarding the proper disposal of electronic equipment according to EU directive.