Kato KRE Series - User Manual

TOOL MAINTENANCE
Tools should be kept clean so that foreign objects and debris (chips, oils, and dirt) will not clog the
drive contour of the Mandrel. Operator misuse can contribute to premature wear and/or damage to
the Mandrel.
• Regularly inspect the tool for wear.
• Clean the drive contour by dipping it in rubbing alcohol.
SAFETY
Always wear eye protection when working with KATO tools.
PARTS REPLACEMENT
Due to the design of the KRE series, replacement parts are not
available.
INSTRUCTIONS FOR USING KATO TANGED COILTHREAD
®
INSERT TOOLS
THE FOLLOWING INSTRUCTIONS ARE APPLICABLE TO THE
KATO TANGED ROUND ELECTRIC INSTALLATION TOOL (KRE Series)
Page 1 Page 4
 2019 KATO Fastening Systems, Inc.

Summary

Tool Maintenance

Safety Precautions

Parts Replacement Policy

Before You Begin Review

Hole Preparation and Fatigue Reduction

Review proper hole preparation and use the KATO Linear Arm (2KLRM-1) to reduce operator fatigue and injury.

Important Notes and Compatibility

Instructional Videos and Driver Compatibility

Information on instructional videos and compatible electric drivers for installation mandrels, noting discontinued models.

Required Components

KATO Non-Prewinder Electric Installation System Components

Lists the components of the KATO Non-Prewinder Electric Installation System, including power transformers and electric drivers.

KRE Series Installation Tool Parts List

Details the parts included in the KRE Series Installation Tool, such as the round mandrel, adjusting sleeve, nylon guard, and lock nut.

Tool Assembly and Depth Adjustment

Mandrel and Sleeve Adjustment Procedure

Step-by-step guide to loosen the lock nut, adjust the sleeve, and thread the insert onto the mandrel to ensure proper depth.

Installation and Torque Settings

Torque Adjustment and Insert Installation Process

Guidance on setting minimum torque, aligning the tool, actuating the driver, and holding the trigger for correct insert installation.

Tang Removal Procedure

Tang Removal using KATO Tools

Instructions for removing the tang from the insert after installation, recommending the KATO Tang Break-Off Tool (KTBT Series).

Helpful Tips and Tricks

Tips for Difficult Insert Starting

Provides tips for difficult insert starting, including short trigger intervals and using alcohol for lubrication, with a warning about dye bleed.

Kato KRE Series Specifications

General

Brand	Kato
Model	KRE Series
Category	Power Tool
Language	English