To Next PageTo Next Page
Need help?Do you have a question about the KaVo Dental K9 and is the answer not in the manual?
Indicates situations that could lead to danger, material damage, or breakdown if ignored.
Provides important information, notes for operators and technicians.
Symbols representing actions like closing, opening, fastening, or withdrawing power.
Lists the specific components included with the K9 type 900 installation.
Lists the specific components included with the K9 type 915 installation.
Lists the specific components included with the K9 type 920 installation.
Details additional accessories available for purchase separately.
Instructions for checking local voltage and frequency against the rating plate.
Specifies the nominal power consumption of the unit.
Guidance on placing the type 900 foot control unit.
Guidance on placing the type 915 benchtop control unit.
Guidance on attaching the type 920 knee control unit.
Specifies permissible indoor conditions, temperature, and humidity.
Instructions on how to disconnect the unit from the mains power.
Step-by-step guide for mounting and connecting the type 900 unit.
Step-by-step guide for mounting and connecting the type 915 unit.
Step-by-step guide for mounting and connecting the type 920 unit.
Power switch, speed selection/adjustment, foot/knee switches, and speed preselector.
Motor/handpiece elements, chuck, test pin, cleaning tools, and handpiece rest.
Cables, plugs, sockets, mounting screws, suspension rails, and carrying handle.
Procedure for safely changing instruments and chucks in the handpiece.
Guide to operating the system using the foot control unit.
Guide to operating the system using the benchtop control unit.
Guide to operating the system using the knee control unit.
Instructions for cleaning the control units externally.
Weekly cleaning procedure for the chuck and handpiece element.
Monthly cleaning of cooling ducts and terminal cap.
Procedure for replacing worn-out carbon brushes.
Addresses issues where the motor handpiece is not turning.
Troubleshooting intermittent stopping or cutting out of the handpiece.
Addresses issues with the chuck not holding tools securely.
Troubleshooting loud noise or overheating of the handpiece.
Provides physical dimensions and weights for different unit types.
Details rated output, voltage, power, and speed ranges.
Specifies the environmental operating conditions.
General| Model | K9 |
|---|---|
| Type | Dental Unit |
| Manufacturer | KaVo |
| Power Supply | 220-240V, 50/60Hz |
| Water Pressure | 2 - 5 bar |
| Lighting | LED operating light |
| Control Panel | Touchscreen |
| Chair Type | Electromechanical |
| Spittoon Bowl | Integrated, with rinsing system |
| Operating Light | LED, adjustable intensity |
