What to do if there is insufficient spray water in KaVo SMARTtorque LUX S619 L?
To address insufficient spray water in your KaVo dental equipment, begin by inspecting the spray water channels. Clean the spray nozzles using nozzle needle Mat. no. 1.003.8150 as necessary. Additionally, ensure the water passage in the spray nozzles is clear by using the same nozzle needle Mat. no. 1.003.8150.
How to care for O-rings on KaVo SMARTtorque LUX S619 L Dental equipment?
To properly care for the O-rings on your KaVo dental equipment, avoid using Vaseline, grease, or oil. The O-ring on the coupling should only be lubricated with a cotton ball moistened with KaVo spray.
What to do if using nonsterile products with KaVo SMARTtorque LUX S619 L Dental equipment?
When handling nonsterile products with KaVo dental equipment, take suitable personal protective measures.
General| Brand | KaVo |
|---|---|
| Model | SMARTtorque LUX S619 L |
| Category | Dental equipment |
| Language | English |
Explains safety symbols, hazard levels (DANGER, CAUTION), and their meaning to prevent injury or damage.
Details specific warnings such as hazards from contraindication, hot instrument heads, and incorrectly stored instruments.
Defines the intended dental treatment use and user responsibilities for safe operation according to regulations.
Lists key technical data like drive pressure, air consumption, idle speed, and power for different SMARTtorque models.
Outlines requirements for temperature, humidity, and air pressure during transport and storage to prevent device malfunction.
Provides steps for securely attaching the MULTIflex coupling to the turbine hose, including tightening with a wrench.
Advises on adjusting water flow for spray cooling to prevent overheating and tooth damage.
Details how to check various pressures (drive, return air, water, spray air) using a test gauge for proper operation.
Emphasizes checking O-rings on the coupling for completeness and damage to prevent malfunctions.
Instructions to ensure correct coupling attachment to avoid damage to lamps or LEDs and maintain service life.
Guide on safely detaching the medical device by holding the coupling and twisting slightly.
Specifies criteria for compatible cutters/grinders and instructions for insertion, including safety precautions.
Warns against touching rotating parts and instructs on safe removal after use to prevent injury.
Details the process of replacing O-rings, advising against Vaseline and recommending specific lubrication.
Explains how to clean spray nozzles to ensure adequate water spray and prevent device overheating.
Covers initial preparation steps for reconditioning, including personal protection and removing debris.
General guidance on cleaning, advising against ultrasonic units and recommending manual or thermodisinfector methods.
Details manual external cleaning process, listing required items like tap water and a brush.
Specifies requirements for automated external cleaning, including thermodesinfector standards and compatible agents.
Describes manual internal cleaning using KaVo sprays, including application steps and post-cleaning care.
Provides information on automated internal cleaning with thermodesinfectors, referencing standards and program settings.
General disinfection advice, cautioning against chlorine and recommending specific methods for effective disinfection.
Lists recommended disinfectants and consumables for manual external disinfection procedures.
Outlines manual internal disinfection, stressing efficacy demonstration and KaVo-approved agents.
Details machine disinfection, referencing thermodesinfector standards and compatible cleaning/disinfecting agents.
Covers both manual and automatic drying methods to ensure the device is completely dry after reprocessing.
Emphasizes using KaVo-approved care products and regular servicing for optimal performance and longevity.
Instructions for servicing after each use, including using KaVo Spray and covering with a CLEANpac bag.
Steps for servicing using KaVo SPRAYrotor, involving coupling and covering with a CLEANpac bag for protection.
Detailed steps for servicing with KaVo QUATTROcare PLUS, including chuck care and mode activation.
Guidelines for packaging the device for sterilization, ensuring the bag is appropriately sized and sealed.
Provides specific instructions for steam sterilization (autoclaving) according to EN standards, including temperature and time parameters.
Recommendations for storing reprocessed devices in a dry, dark, and cool environment to maintain sterility and quality.
To Next Page