Need help?Do you have a question about the KaVo INTRA K-LUX 200 and is the answer not in the manual?
General| Type | LED curing light |
|---|---|
| Light Source | LED |
| Wavelength Range | 430 - 480 nm |
| Curing Time Settings | 5, 10, 15, 20 seconds |
| Battery Type | Lithium-ion |
| Light Guide Diameter | 8 mm |
Information on sending the product for factory repair services.
Contact details for technical support and product inquiries.
Identifies dentists, dental staff, and service technicians as the audience.
Explanation of important symbols used within the manual.
Details regarding material number, serial number, and manufacturer.
Risks of infection from contaminated devices and necessary precautions.
Hazards associated with sparks in explosive areas or flammable gases.
Risks of electric shock from incompatible systems or improper grounding.
Ensuring the device is undamaged and functioning correctly before each use.
Potential interference with implanted medical devices like pacemakers.
Guidelines for using approved accessories and compatible equipment.
Requirement for trained personnel to operate the device safely.
Procedures and authorized personnel for servicing and repairs.
Risks to property from contaminated air or water supplies.
Proper disposal methods for electronic waste as per EC directives.
Defines the motor's intended use for dental procedures and proper operation.
Provides essential specifications for motor electronics, voltage, speed, and torque.
Specifications for air quality and filter requirements for operation.
Specifications for water quality, pH, and filter requirements.
Details on operating voltage and power for the high-pressure lamp.
Specifies temperature, humidity, and air pressure for operation.
Conditions for temperature, humidity, and air pressure during transport and storage.
Warning about infection risk from non-sterile products and need for reprocessing.
Emphasis on proper disposal procedures to prevent infection hazards.
Alerts to malfunctions caused by contaminated or moist cooling air.
Step-by-step guide for connecting the motor to the supply hose.
Instructions for adjusting spray water for optimal cooling and performance.
Procedure for safely attaching handpieces or contra-angle instruments.
Procedure for safely detaching instruments from the motor.
Procedures for initial checks to identify potential issues before operation.
Guidance on resolving common issues like overheating or speed problems.
Detailed steps for safely replacing the high-pressure lamp.
Instructions for replacing O-rings on the motor coupling for proper function.
Procedures for preparing the device for reprocessing to prevent infection.
Detailed steps for manual cleaning and disinfection of the device.
How to perform external cleaning of the motor using specified accessories.
Notes that internal cleaning is not applicable for this device.
Guidelines for manual external disinfection using approved agents.
Notes that internal disinfection is not applicable.
Procedures for drying the device after cleaning and disinfection.
Notes that automated reprocessing is not applicable.
Advice on using appropriate care products and regular servicing.
Notes that packaging information for reprocessing is not applicable.
Notes that sterilization is not applicable, but the sleeve can be autoclaved.
Lists essential tools and consumables with their material numbers.
Outlines KaVo's warranty period, coverage, and conditions for the medical device.
To Next Page