Need help?Do you have a question about the KaVo ORTHOPANTOMOGRAPH OP 3D Pro and is the answer not in the manual?
General| Imaging Technology | Cone Beam Computed Tomography (CBCT) |
|---|---|
| Imaging Modalities | Panoramic, Cephalometric, CBCT |
| CBCT Scan Volume Sizes | 5x5 cm, 13x15 cm |
| Resolution | High resolution imaging |
| Scan Time | 5-20 seconds, depending on scan mode and resolution |
| Software | KaVo Imaging Software |
| Panoramic Programs | Multiple panoramic imaging programs |
| X-ray Tube Voltage | 60-90 kV |
| Power Requirements | 230V AC, 50/60 Hz |
| Type | Cone Beam Computed Tomography (CBCT) and Panoramic Imaging System |
Covers safety, cross-infection, installation, ESD, and general warnings.
Identifies key components and user interface elements of the unit.
Describes the primary interface for operating the X-ray system.
Details the operation and function of the emergency stop button.
Detailed descriptions of individual circuit boards and their functions.
Provides in-depth explanations of firmware components.
Explains the function and wiring of the emergency stop mechanism.
Explains the signal flow for 3D, Panoramic, and Cephalometric imaging.
Instructions on how to launch and connect to the s2Terminal application.
Details commands for image download, unit reservation, and firmware updates.
Explains commands to check and change the unit's operational states.
Lists commands for checking and configuring unit operations.
General steps to take when encountering errors or issues.
Methods for diagnosing faults using s2Terminal commands.
Detailed explanations and solutions for specific error codes.
Steps for performing yearly maintenance on the unit.
To Next Page
