What to do if my KaVo ESTETICA E30 Dental equipment patient chair does not move?
If the patient chair isn't moving, the safety shutoff may be activated, indicated by a flashing LED on the control panel. Check the safety shutoff and resolve the issue causing it to activate.
What to do if the safety shut-off is activated on my KaVo dental equipment?
If the safety shut-off is activated on your KaVo dental equipment, remove any objects or obstructions that are triggering the motion sensors. This will deactivate the safety shut-off.
What to do if nothing works on my KaVo ESTETICA E30 Dental equipment?
If your KaVo dental equipment isn't working, first, make sure the main switch is turned on. If it still doesn't work, unplug the unit and check the main service fuse located next to the master switch. Open the bayonet closure with a screwdriver and replace the fine-wire fuse (T 6.3 H Mat. no.0.223.2783). Then, re-close the bayonet closure with the screwdriver.
Why is there no water in the tumbler and spittoon bowl of my KaVo ESTETICA E30?
If there's no water in the tumbler and spittoon bowl, the water bottle might be empty, so fill it. Also, check if there is air pressure in the unit by turning on the compressor.
Why is there no spray in the handpieces of my KaVo Dental equipment?
If there is no spray in the handpieces, first preselect spray. Also, make sure the ring for controlling the spray on the handpieces is open. Check the setting on table-side butterfly valves.
Why is the turbine on my KaVo ESTETICA E30 Dental equipment making loud running noises?
Loud running noises from the turbine indicate a faulty turbine wheel. Replace the turbine wheels, following the operating instructions for the turbine.
What to do if the suction hoses of my KaVo Dental equipment do not have any suction?
If the suction hoses lack suction: 1. Ensure the slides on the conical sections are open. 2. Replace blocked sieves in the suction connector. 3. Relieve the base plate if it has been activated for vacu-stop. 4. Turn on the suction machine and check its fuse.
Why is the spray at the instruments of my KaVo Dental equipment insufficient?
If the spray at the instruments is insufficient, the spray nozzles may be dirty or clogged. Clean the spray nozzles according to the instrument operating instructions.
Why is there water in the return air filter of my KaVo ESTETICA E30?
If there's water in the return air filter, the O-rings of the MULTIflex coupling might be damaged. Replace all O-rings of the MULTIflex coupling.
Why is there no cold light in the instruments of my KaVo Dental equipment?
If there is no cold light in the instruments, first preselect cold light. If that doesn't work, the high-pressure lamp or Multi LED on the instrument may be defective, replace it.
General| Type | Dental Chair |
|---|---|
| Manufacturer | KaVo |
| Model | ESTETICA E30 |
| Water Pressure | 2-4 bar |
| Dental Chair | Yes |
| Adjustable Headrest | Yes |
| Armrests | Yes |
| Foot Control | Yes |
| Lighting | LED |
| Control Panel | Touchscreen |
| Chair Type | Dental Chair |
| Power Supply | 220-240 V, 50/60 Hz |
| Water Unit | Integrated |
| Assistant Element | Optional |
| Operating Light | LED |
| Hygiene System | Integrated |
| Instrumentation | Optional |
| Color Options | Wide range of colors available for upholstery and unit body |
Performing and documenting safety checks as required.
Resetting the service counter as per technician instructions.
Conducting a final check, similar to the incoming function test.
To Next Page
