What does it mean when the "HYDROclean" button (red) flashes on KaVo ESTETICA E50 Life?
If the LED on the 'HYDROclean' button flashes red on your KaVo dental equipment, there is a malfunction in the amalgam separator. Call a service technician.
What to do if my KaVo Dental equipment patient chair does not move?
If the patient chair does not move, check if the safety shutoff is activated (indicated by a flashing LED on the control panel). Eliminate the reason for the shutoff.
What does it mean when an acoustic signal is issued every second on my KaVo Dental equipment?
If an acoustic signal is issued every second, the leaking water switch recognizes leaking water. Remove water from the unit body.
What does ID 72 mean on my KaVo Dental equipment display?
If your KaVo dental equipment display shows 'ID 72', insert the DEKAPURE bottle.
What to do if the spray at the instruments is insufficient on KaVo Dental equipment?
If you are getting an insufficient spray at the instruments of your KaVo dental equipment, the spray nozzles may be dirty or clogged. Clean the spray nozzles according to the accompanying instrument operating instructions.
What to do if my KaVo Dental equipment camera freezes even after reinserting it?
If your KaVo dental equipment camera freezes even after taking it out and reinserting it, the issue might be electrical or electromagnetic interference from other equipment. Restart the software.
Why is there no cold light on my KaVo ESTETICA E50 Life Dental equipment multifunctional handpiece?
If there is no cold light on your KaVo dental equipment multifunctional handpiece, the heating function may be preselected. Preselect cold light instead.
Why there is no cold light on the handpieces of KaVo Dental equipment?
If there is no cold light on the handpieces of your KaVo dental equipment, first ensure that cold light is preselected. If that's not the issue, the high-pressure lamp or LED lamp on the handpiece may be defective and require replacement. Refer to the Instructions for Use of the handpiece for guidance.
What to do if KaVo Dental equipment display shows ID 70?
If the KaVo dental equipment displays 'ID 70', this indicates that Dekaseptol is empty. You should replenish Dekaseptol, referring to the care instructions for guidance.
Why is the spray insufficient in my KaVo Dental equipment instruments?
If the spray at the instruments of your KaVo dental equipment is insufficient, the spray nozzles may be dirty or clogged. Clean the spray nozzles according to the instrument operating instructions.
Provides essential information for safe and correct operation.
Explains the structure, symbols, and hazard levels of safety warnings.
Specifies the designated purpose and limitations of the dental unit.
Provides general and product-specific safety guidelines for operation.
Instructions for powering the dental unit on and off, with a note on switching off before leaving.
Guides on how to adjust the dental chair, including armrests and patient comfort.
Describes how to use automatic chair positions and save custom settings.
Explains the safety shut-off mechanisms that prevent collisions and injuries.
Provides general instructions and notes for performing safety checks on the device.
Provides detailed steps and precautions for conducting safety checks.
General| Type | Dental treatment unit |
|---|---|
| Model | ESTETICA E50 Life |
| Manufacturer | KaVo |
| Integrated endodontics functions | Yes |
| Integrated surgical functions | Yes |
| Cuspidor | Integrated |
| Control Panel | Touchscreen control panel |
| Air/Water Syringe | Integrated |
| Power Supply | 230 V, 50/60 Hz |
| Operating light | LED operating light |
| Multimedia integration | Optional |
| Hygiene system | Integrated |
| Chair Positions | Multiple programmable positions |
| Lighting | LED operating light |
| Spittoon | Integrated |
| Foot Control | Foot control available |
| Air Supply | 500 - 800 kPa (5 - 8 bar) |
| Water Supply | 200 - 500 kPa (2 - 5 bar) |
To Next Page
