What to do if the red LED flashes and there is a signal sound on my KaVo Dental equipment?
If the red LED flashes and a signal sounds, it could be due to the spray can not being properly inserted. Make sure to insert the spray can correctly. Alternatively, the spray can might be empty, so try inserting a different spray can.
Why are the green LEDs flashing and a signal sounding on my KaVo QUATTROcare PLUS 2124 A Dental equipment?
If the green LEDs flash and a signal sound is emitted, it may be because the front door was opened prematurely, or the handpiece fell off the adapter during servicing. Wait for the service procedure to complete and for the audio signal to be emitted. Then, properly mount the handpiece and repeat the service procedure.
What does it mean if the LED light is flashing on my KaVo QUATTROcare PLUS 2124 A Dental equipment?
If the LED light is flashing, the barcode may not be detected or cannot be read. Insert an original KaVo spray canister and notify the KaVo Service Team.
How to fix oil leaks from the handpiece after servicing my KaVo Dental equipment?
If oil leaks from the handpiece after servicing, the set blow-out time may be too short. Try setting a longer blow-out time.
What does it mean if LEDs 1 and 3 flash alternately with LEDs 2 and 4 on my KaVo QUATTROcare PLUS 2124 A Dental equipment?
If LEDs 1 and 3 flash alternately with LEDs 2 and 4 and a signal is emitted, the fan might be blocked or defective. Replace the fan and notify the KaVo Service Team.
Why is the red LED flashing during the service cycle on my KaVo QUATTROcare PLUS 2124 A Dental equipment?
If the red LED flashes during the service cycle, the bridging function may be activated. Insert an original KaVo spray canister and notify the KaVo Service Team.
Why is there oil leaking from my KaVo QUATTROcare PLUS 2124 A Dental equipment handpiece after servicing?
If oil leaks from the KaVo dental equipment handpiece after servicing, it might be because the blow-out time is set too short. To resolve this, set a longer blow-out time.
What to do if green LEDs flash and a signal sounds on KaVo QUATTROcare PLUS 2124 A?
If the green LEDs are flashing and a signal sounds on your KaVo Dental equipment, it could be due to a couple of reasons. Either the front door was opened prematurely, in which case you should wait for the service procedure to complete and the audio signal to sound, or the handpiece fell off the adapter during service, so properly mount the handpiece and repeat the service procedure.
Why is the red LED flashing on my KaVo QUATTROcare PLUS 2124 A Dental equipment and a signal sound is emitted?
If the red LED flashes and a signal sound is emitted on your KaVo Dental equipment, it could be due to the spray can not being properly inserted. In this case, insert the spray can properly. Alternatively, the spray can might be empty, so try inserting a different spray can.
What does it mean if LEDs 1 and 3 flash alternately with 2 and 4 on KaVo Dental equipment?
If LED 1 and 3 flash alternately with 2 and 4, accompanied by a signal on your KaVo Dental equipment, the fan might be blocked or defective. The suggested solution is to replace the fan. For further assistance, it is recommended to notify the KaVo Service Team.
General| Brand | KaVo |
|---|---|
| Model | QUATTROcare PLUS 2124 A |
| Category | Dental equipment |
| Language | English |
Precautions to prevent explosions due to overheating or hazardous environments.
Safety measures to prevent electrical shock from improper grounding or connections.
Details on the specific applications and uses of the QUATTROcare PLUS 2124 A.
Instructions for connecting the device to power and compressed air sources.
Procedures for replacing the spray canister, including insertion and removal.
Overview and explanation of the device's control panel buttons and indicators.
Procedure for attaching dental handpieces to the service couplings.
Steps to initiate the automatic servicing procedure for handpieces.
To Next Page