Need help?Do you have a question about the KaVo SURGmatic S201 XL Pro and is the answer not in the manual?
General| Motor Type | Electric |
|---|---|
| Connection | ISO 3964 |
| Autoclavable | Yes |
| Type | Surgical Handpiece |
| Speed Range | 200 - 40, 000 rpm |
| Material | Stainless steel |
Explains various symbols and markings used to convey critical information within the manual.
Details the labels and information found on the product's packaging.
Defines the different warning levels: Danger, Warning, Caution, and Notice.
Addresses risks of infection and outlines necessary protective measures and reprocessing.
Emphasizes checking the device's condition, reporting defects, and proper servicing.
Specifies requirements for compatible accessories, modifications, and qualified service personnel.
Highlights the need for trained personnel and safe handling practices to prevent injuries.
Details who can perform repairs and safety checks, and recommended service intervals.
Defines the medical device's intended dental applications and proper usage guidelines.
Lists key performance data like drive speed, torque, and transmission ratios.
Specifies environmental requirements for safe transit and storage of the device.
Instructions for verifying adequate cooling water supply to prevent overheating during operation.
Step-by-step guide for securely attaching the handpiece head.
Instructions for safely removing the handpiece head.
Procedure for safely connecting the handpiece to the motor.
Steps to safely disconnect the handpiece from the motor.
Guidelines for properly inserting dental burs or diamond grinders.
Instructions for safely removing dental burs or diamond grinders.
Basic checks for identifying common operational problems like overheating or speed inconsistencies.
Procedure to clean spray channels to ensure proper water flow and prevent overheating.
Initial steps to prepare the device for cleaning and disinfection after use.
Initial cleaning of spray clips and tubes before automated reprocessing.
Detailed instructions for manual cleaning, disinfection, and drying processes.
Steps for automated cleaning, disinfection, and drying using washer disinfectors.
Information on maintenance, lubrication, and care using specific KaVo products.
Guidelines for packaging the device appropriately for sterilization to maintain sterility.
Procedures for steam sterilisation (autoclaving) according to EN standards.
Recommendations for storing the device after sterilization to maintain its condition.
To Next Page