4 First use
WARNING
Hazard from non-sterile products.
Risk of infection to the care provider and patient.
▶ Before first use and after each use, prepare and sterilise the medical device.
4.1 Inserting the SONICflex tips
▶ Insert the desired tip with the tip end pointing down into the torque wrench and
screw it into the handpiece by turning it clockwise.
CAUTION
Hazard from a tip which has been incorrectly inserted in the torque wrench.
This may result in a risk of injury for the user.
▶ When inserting the tip into the torque spanner, make sure that the tip's end
always faces into the opening of the torque spanner.
The torque wrench is for changing the working tips of the SONICflex and to pro‐
tect against injury. The torque wrench can be screwed in more quickly by holding
it at the rear, thin grip area ①. The large diameter ② is used for tightening and
removal.
Note
The tip is properly gripped when the torque wrench slips.
Note
When the SONICflex is in the holder, the torque wrench should be placed on the
tip to protect against injury.
4.2 Removing the SONICflex tip
▶ Place the torque wrench on the SONICflex tip, and unscrew it anticlockwise.
Instructions for use For SONICflex tips paro - REF 0.571.0371, paro A - REF 1.006.2020
4 First use | 4.1 Inserting the SONICflex tips
8/17
To Next Page
Loading...
Need help?
General
