Need help?Do you have a question about the Kawai K1M and is the answer not in the manual?
General| Brand | Kawai |
|---|---|
| Model | K1M |
| Category | Synthesizer |
| Language | English |
Covers MIDI capabilities, including assigning sound sources to different MIDI channels.
Explains using the K1/K1m as multiple MIDI sound sources via MIDI channels.
Details the VM tone generator, combining frequency, waveform, and envelope.
Introduces EDIT mode and basic parameter selection for tone patches.
Explains how parameters and their values are displayed and adjusted in EDIT mode.
Explains saving edited patches to internal memory or a memory card.
Describes the information shown on the EDIT display and how to select sound sources.
Explains common parameters affecting all sources, like SOURCE selection and polyphony.
Selects waveforms and configures AM (Ring Modulation) and copy functions.
Advises selecting a close MULTI patch and editing it, then outlines the steps.
Details editing the VOLUME and assigning a 10-character NAME to a MULTI patch.
Assigns SINGLE patches to SECTIONS within a MULTI patch.
Defines the lower and upper keyboard zone limits for a SECTION.
Determines the upper limit of the keyboard zone for a SECTION.
Sets polyphonic voices and MIDI channel assignments for SECTIONS.
Adjusts SECTION pitch, volume, and output routing.
Explains the purpose of the WRITE function for saving patches to memory or card.
Details the steps to disable protection, select destination, and save the current tone patch.
Provides a detailed chart of MIDI functions transmitted and recognized by the synthesizer.
To Next Page
