Kawai KC20 User Manual

Details the two primary operating modes: Compose for arranging and Performance for live playing.

Details the serial interface for direct computer connection, enabling DTM systems.

Provides a brief overview of KC20 functions and setup with other devices.

Explains how to play and edit in the Compose mode.

Details how to make settings and control important section parameters.

Covers settings related to the overall operation of the KC20.

Describes Quick MIDI functions for real-time control of external MIDI equipment.

Emphasizes using the correct power supply and proper connection procedures.

Outlines the correct order for turning on and off the KC20 and connected devices.

Identifies and describes the function of each control on the KC20's front panel.

Provides instructions for connecting the KC20 to audio systems and headphones.

Details connecting the KC20 directly to computers via the serial interface for DTM.

Explains the KC20's role as both a sound source and a MIDI master keyboard.

Provides a summary of the KC20's different operating modes.

Details the functions of Performance Play, Compose Play, Performance Edit, Compose Edit, System, and Quick MIDI modes.

Explains how to set up and start playing in the Compose mode.

Details the sections, MIDI channels, and display information within Compose mode.

Provides instructions on entering edit mode and using value adjustment buttons.

Explains how to enter and use the Performance mode, including patch selection.

Describes combining two tones (dual/layering) and selecting patches (P11-P88).

Provides instructions for entering edit mode and adjusting parameters for performance patches.

Explains how to set tone switching based on playing velocity (ALL, SOFT, LOUD).

Provides basic information about MIDI, including ports, messages, and channel numbers.

Introduces the System Edit mode for adjusting overall KC20 settings.

Explains how to reset KC20 parameters to factory defaults.

Details setting the connection between the keyboard and internal sound source (ON/OFF).

Sends current programs and volume settings as a snapshot via MIDI OUT.

Sends all KC20 settings (Compose, Performance, System) as SysEx data for storage.

Sends only the Section settings for the KC20 as SysEx data for storage.

Sends only the System settings for the KC20 as SysEx data for storage.

Explains Quick MIDI for direct control of external MIDI devices, independent of KC20 events.

A reference chart summarizing Compose mode editing functions and parameters.

A reference chart summarizing Performance mode editing functions and parameters.