EasyManua.ls Logo

Kawasaki H2 - User Manual

Kawasaki H2
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Question and Answer IconNeed help?

Do you have a question about the Kawasaki H2 and is the answer not in the manual?

Summary

Assembly Instructions

Uncrating and Initial Setup

Instructions for uncrating the motorcycle and preparing the workspace.

Parts Identification and Check

Verify all delivered parts against the provided illustration.

Front Wheel and Fender Installation

Detailed steps for mounting the front wheel, axle, and fender.

Handlebar and Instrument Assembly

Procedure for installing the handlebar, speedometer, and tachometer.

Steering System Components

Installation of steering damper and related parts.

Lighting and Signal Installation

Mounting front and rear turn signals and related wiring.

Seat Assembly

Installing the seat backrest and the complete seat assembly.

Preparation Servicing

Battery Preparation and Installation

Steps for filling, charging, and installing the motorcycle battery.

Draining Preservative Oil

Instructions to drain the transmission's preservative oil before use.

Fluid Checks and Fills

Procedures for filling transmission, oil tank, and chain oiler.

Service Specification

Ignition System Timing

Procedures for setting static and dynamic ignition timing.

Cable and Lever Adjustments

Adjusting starter cables, throttle cables, and clutch lever.

Carburetor and Oil Pump Tuning

Steps for synchronizing carburetors and adjusting the oil pump.

Brake System Adjustments

Adjusting brake fluid levels, fittings, and light switches.

Chassis and Drive Chain Adjustment

Adjusting rear wheel alignment and drive chain slack.

Pre-Sale Service Checklist

List of items and tool sizes for pre-delivery inspection.

Summary

Assembly Instructions

Uncrating and Initial Setup

Instructions for uncrating the motorcycle and preparing the workspace.

Parts Identification and Check

Verify all delivered parts against the provided illustration.

Front Wheel and Fender Installation

Detailed steps for mounting the front wheel, axle, and fender.

Handlebar and Instrument Assembly

Procedure for installing the handlebar, speedometer, and tachometer.

Steering System Components

Installation of steering damper and related parts.

Lighting and Signal Installation

Mounting front and rear turn signals and related wiring.

Seat Assembly

Installing the seat backrest and the complete seat assembly.

Preparation Servicing

Battery Preparation and Installation

Steps for filling, charging, and installing the motorcycle battery.

Draining Preservative Oil

Instructions to drain the transmission's preservative oil before use.

Fluid Checks and Fills

Procedures for filling transmission, oil tank, and chain oiler.

Service Specification

Ignition System Timing

Procedures for setting static and dynamic ignition timing.

Cable and Lever Adjustments

Adjusting starter cables, throttle cables, and clutch lever.

Carburetor and Oil Pump Tuning

Steps for synchronizing carburetors and adjusting the oil pump.

Brake System Adjustments

Adjusting brake fluid levels, fittings, and light switches.

Chassis and Drive Chain Adjustment

Adjusting rear wheel alignment and drive chain slack.

Pre-Sale Service Checklist

List of items and tool sizes for pre-delivery inspection.

Kawasaki H2 Specifications

General IconGeneral
Engine TypeLiquid-cooled, 4-stroke In-Line Four with Supercharger
Displacement998 cc
Maximum Torque137.3 Nm {14.0 kgf-m} @ 10, 500 rpm
Transmission6-speed
Frame TypeTrellis frame
Front Suspension43 mm inverted fork with adjustable rebound and compression damping, spring preload
Rear SuspensionNew Uni-Trak with adjustable rebound and compression damping, spring preload
Front BrakesDual 330 mm discs
Rear BrakesOpposed 2-piston calipers, 250 mm disc
Seat Height825 mm / 32.5 in
Fuel Capacity4.5 gal (17 L)
Curb Weight238 kg / 525 lbs
Tire Front120/70 ZR17
Tire Rear200/55 ZR17

Related product manuals