KAWNEER 1786 User Manual

Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product congurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement. © Kawneer Company, Inc., 2013
1
kawneer.com
EC 97904-076
2-1/16"
40"
41-9/32"
Kawneer 1786 Rim Exit Device
INSTALLATION INSTRUCTIONS
APRIL, 2018
038311EN
CYLINDER INSTALLATION
Cylinder must be installed before exit device.
Insert cylinder with cylinder ring into the door stile
and secure in place with cylinder mounting screws.
Cylinder
C
L
Device
C
L
Bottom of door
HOUSING COVER
FILLER PLATE
EXIT DEVICE
DOOR STILE
DOGGING KEY
RIM EXIT DEVICE LOCATION
CYLINDER &
CYLINDER RING
CYLINDER
CYLINDER RING
CYLINDER
MOUNTING
SCREWS
INSTALLING CYLINDERS BY OTHERS
Cut tailpiece to correct length and install.
(Mounting screw heads must be ush with door surface.)
Cylinder mounting screws
must be ush
Note:AnymodicationoftheExitDevicedoneintheeldshallvoidthewarrantyoftheproduct.Kawneer
 cannotguaranteetheproperfunctionofanExitDevicethathasgonethroughanytypeofmodication.

KAWNEER 1786 Specifications

General

Brand	KAWNEER
Model	1786
Category	Locks
Language	English

Summary

Kawneer 1786 Rim Exit Device Installation Instructions

Rim Exit Device Location

Specifies the correct placement and dimensions for the rim exit device on the door.

Cylinder Installation

Details the process of installing the cylinder into the door stile before the main device.

Installing Cylinders by Others

Provides instructions for installing cylinders provided by other manufacturers.

Optional Trim: Lever Handle Trim Assembly and Installation

Exit Device Dogging and Attachment

Push Pad Dogging Operation

Instructions on how to engage (dog) and disengage (undog) the exit device using a push pad.

Cylinder Dogging Operation

Explains the process of engaging (dogging) the exit device using a cylinder.

Exit Device Attachment to Door Stiles

Details on how to attach the exit device to the door stiles using mounting brackets and fasteners.

Assembly and Strike Installation

Final Assembly of Exit Device

Details the steps for assembling the housing cover and end caps onto the exit device.

Strike Installation and Adjustment

Instructions on preparing the door jamb and installing/adjusting the strike plate.

Parts Breakdown and Packages

Push Bar Dogging Parts Breakdown

Lists and illustrates all parts included for the push bar dogging version of the exit device.

Cylinder Dogging Parts Breakdown

Lists and illustrates all parts included for the cylinder dogging version of the exit device.

Removable Mullion Package Components

Lists all parts included in the package for installing a removable mullion.

Removable Mullion Installation

Removable Mullion Preparation

Details the necessary preparation for the header/t-bar and threshold for mullion installation.

Removable Mullion Installation Procedure

Step-by-step guide for attaching and installing the removable mullion into the door frame.

Mullion Stabilizer Installation

Instructions for installing the stabilizers to secure the mullion to the door and frame.