Need help?Do you have a question about the KAYACAT PUMA and is the answer not in the manual?
List of all components included in the Puma Kayacat backpack for inventory.
Step-by-step guide to unpacking the Puma Kayacat, including surface preparation and valve checks.
Connecting seat frame halves and adding seat frame poles for narrow mode.
Positioning the mesh seat and attaching the seat spray guard for narrow mode.
Securing the assembled frame to the Kayacat and adjusting components for fit.
Assembling paddle shafts, fitting blades, and preparing for Stand Up Paddling.
Connecting the paddle leash to the paddle and seat for enhanced safety.
Separating cargo nets for narrow mode and securing them to the Kayacat float.
Slotting backpack shoulder straps around seat frame extension poles.
Emphasizing safety leash attachment and clipping it to the seat.
Attaching seat extension tubes and frame poles for wide mode assembly.
Preparing the mesh seat and ensuring floats/struts are ready for inflation.
Inflating the cross struts for the wide mode configuration.
Securing inflation valves, attaching the pump, and adjusting the backrest.
List of all components included in the Cougar Kayacat backpack for inventory.
Step-by-step guide to unpacking the Cougar Kayacat, including valve and strut preparation.
Inflating main floats, securing valves, and attaching the pump.
Connecting seat halves, extension tubes, and frame poles.
Attaching the torque bar and installing the rudder stock assembly.
Fitting the mesh seat, splash guard, and connecting the SUP handle/tiller arm.
Securing the frame to the float and adjusting the backrest for comfort.
Attaching the dagger board and connecting the second paddle blade to the rudder stock.
Extending the mast, inserting it into the sail sleeve, and routing the sail sheet.
Adjusting the sail sheet in the cam cleat and attaching cargo nets.
Steps to unclip the sail sheet, remove the mast, and reassemble the paddle.
To Next Page
General