1. The picture on the left shows the tools required
for unpacking & assembling the eA70.
①
Ft lbs. Torque wrench
②
Socket extension
③
10mm socket
④
12mm socket
⑤
17mm socket
⑥
27mm socket
⑦
12mm wrench
⑧
12mm-14mm wrench
⑨
Needle nose pliers
⑩
8mm T-Wrench (or socket)
10mm T-Wrench (or socket)
2.Remove the straps and cardboard cover.
3.Remove hardware box and components from
crate.
4.Picture shows contents of packaged
components.
5. Contents of hardware inside packaged box.
Hardware chart on next page.
To Next Page
