1. The picture on the left shows the tools required
for unpacking & assembling the vehicle as below
① Torque wrench
② No.10-12 wrench
③ No.12-14 wrench
④ 6mm hexagon socket
⑤ 12mm socket
⑥ 21mm socket
⑦ Needle nose pliers
⑧ No. 8 T-sleeve
2.Remove the straps and cardboard cover.
3.Take out the parts attached on the vehicle and
the packaging iron frame, remove the iron frame
screws, wait for subsequent installation.
4.The parts shown above need to be
subsequently installed on the vehicle.
5.The picture above shows the parts in the
accessory box. Please read the user’s manual (L)
carefully before assembling and install these parts
according to the operation steps.
To Next Page
Loading...