What to do if Kayoba 960-500 Toy helicopter does not respond to commands?
If your Kayoba Toy helicopter isn't responding to commands or you've lost control, it might be due to a frequency mismatch between the transmitter and receiver. Try setting the correct frequency or restarting the rotors. Also, the surrounding area might be too bright, so consider moving to another location to fly the helicopter.
Why does my Kayoba 960-500 helicopter stop and lose height?
If your Kayoba Toy helicopter stops and loses height during flight, the battery level might be low. You should charge the battery.
How to fix Kayoba 960-500 Toy when the rotor does not spin?
If the rotor on your Kayoba Toy isn't spinning, first check if the power switch is in the OFF position and turn it to the ON position. If that doesn't solve the issue, the battery might be weak, and you should charge it.
Instructions on how to open the transmitter, insert AA batteries, and secure the compartment cover.
Guidance on selecting frequencies, placing the helicopter, and initial power-on sequence for flight.
Covers operating controls for ascending, descending, forward/backward movement, turning, and steering calibration.
Step-by-step instructions for charging the helicopter's battery using a USB cable or the transmitter's cable.
To Next Page
General