Do you have a question about the Kaysun KSDA-35 DVR14 and is the answer not in the manual?
Identifies specific indoor and outdoor unit model numbers for the purchased equipment.
Provides detailed technical specifications for indoor and outdoor units, including motors, coils, and dimensions.
Illustrates the physical dimensions of the indoor and outdoor units with diagrams for installation planning.
Shows the center of gravity points for the outdoor units, relevant for handling and installation.
Lists abbreviations and their meanings for electrical wiring components, essential for setup and troubleshooting.
Explains the refrigerant flow and components in the system with a diagram for operational understanding.
Displays airflow velocity and temperature distribution charts for cooling and heating modes.
Provides cooling and heating capacity data based on various indoor and outdoor conditions.
Details correction factors for capacity based on height difference and pipe length for accurate performance.
Presents noise level graphs for indoor and outdoor units at various frequencies.
Outlines electrical specifications for outdoor unit power and connecting wiring.
Explains various operational modes like cooling, heating, auto, drying, and forced operation.
Lists all included accessories with their names, shapes, and quantities for installation.
Provides a visual step-by-step guide for the entire installation process.
Details recommended and prohibited locations for unit installation to ensure optimal performance.
Explains the procedure for mounting and installing the indoor unit, including service space.
Covers guidelines for installing the outdoor unit, including service space and bolt pitch.
Details how to install drainage pipes, including principles, selection, and key points.
Provides instructions for refrigerant pipe installation, including length, drop height, and procedures.
Explains the process of vacuum drying and checking for leaks in the refrigerant system.
Guides on calculating and charging additional refrigerant based on pipe length and diameter.
Details insulation for refrigerant and drainage pipes, including material selection and installation.
Details electrical wiring highlights and cable selection guidelines for safe connections.
Outlines pre-test checks and steps for performing test operations on the installed unit.
Describes how to perform a drainage test to ensure smooth flow and check for leaks.
| Brand | Kaysun |
|---|---|
| Model | KSDA-35 DVR14 |
| Category | Music Mixer |
| Language | English |