Kaytee My First Home Ferret User Manual

Carefully Unpack and Sort All Components on the Parts List
Important:
SAVE YOUR INSTRUCTIONS FOR FUTURE REFERENCE
If your new pet home has experienced damage during shipping,
please do not return your cage to the store.
Our Customer Service Department is available to help with any problems.
Our Toll-Free Number (within the USA and Canada only) is 800 -255-4527,
Monday - Friday from 8:00 a.m. to 4:00 p.m. (Central Standard Time).
UPCMATERIAL NO.DESCRIPTION
MFH Ferret 24" x 24" Habitat
045125502480
100509411
Manufactured by: KAYTEE Products, Inc., Chilton, WI 53014 USA
©2016 KAYTEE Products, Inc.
Made in the USA of US and Imported Parts
Kaytee and Kaytee with design are registered trademarks of Kaytee Products, Inc.
For more information on bird and small animal products,
visit us at: kaytee.com
PP1004216
24” x 24”
My First Home Ferret
Assembly Instructions
Attach the Safety Ramps (E) to the edges of the 2 top comfort shelves and the bottom shelf. Then
assemble and attach the slide (H, I, J & K) to the Comfort Shelf with Hole (G).
STEP 8
H
I
J
K
Position the Comfort Shelf with Hole (G) on the 16
th
wire up from the bottom.
Position the solid Comfort Shelves (F) on the 5
th
wire up from the bottom, 7
th
from the top and
the 15
th
from the top.
STEP 7
Pinch Bunny Ear latches on each side of the Cage Wire Set (A) and lift the entire Cage Wire Set off
the Plastic Base (C). Set the assembly on a flat surface while you empty the Plastic Base (C). Empty
and wash the Plastic Base (C) with soap and water or spray with Kaytee
®
Clean Cage (Item
#100079553) (sold separately), and wipe dry. Kaytee
®
Clean Cage neutralizes odors, safely cleans
surfaces and is non-toxic to all pets.
Cleaning Your Habitat
Special Note:
Door Lock: Be sure to unlock and press the latch down prior to
pulling.

Kaytee My First Home Ferret Specifications

General

Brand	Kaytee
Model	My First Home Ferret
Category	Pet Care Product
Language	English

Summary

Assembly Instructions

STEP 7: Position Comfort Shelves

Position comfort shelves on specific wire levels from the bottom or top.

STEP 8: Attach Ramps and Slides

Attach safety ramps to shelves and assemble the slide mechanism to the habitat.

Habitat Maintenance

Cleaning Your Habitat

Instructions for cleaning the habitat base and wire set using soap/water or Kaytee Clean Cage.

Important Notes

Important: Unpack and Sort Components

Carefully unpack and sort all components from the parts list before assembly.

Special Note: Door Lock Mechanism

Instructions to unlock and press the door latch down before pulling.

Component Identification

Parts Identification List

List of all parts with their respective keys, quantities, and descriptions.

Assembly Steps

STEP 1: Prepare Cage Wire Set

Lay the unwrapped cage wire set on a flat surface with the doorway facing upward.

STEP 2: Unfold Panels

Carefully unfold the front, back, and side panels of the cage.

STEP 3: Assemble Wire Frame

Lock side panels to back panel, then front panel to side panels and attach doors.

STEP 4: Install Caster Wheels

Turn the plastic base upside down and insert caster wheels into predrilled holes.

STEP 5: Attach Wire Set to Base

Place cage wire set upright on plastic base, aligning doorway and locking tabs.

STEP 6: Secure Cage Wire Set

Line up the loops at the bottom of the cage wire set to the holes on the plastic base.