Need help?Do you have a question about the Kaz HCM-890 Series and is the answer not in the manual?
Ensure a stable surface, keep away from children and heat sources.
Check cord, use polarized plug correctly, disconnect safely, avoid loose outlets.
Unplug when not in use or moving, never move while operating.
Regular cleaning is required; turn off if humidity is too high.
Explains the Natural Cool Moisture™ system and Automatic Moisture Balance System™.
Identifies key parts like Motor Housing, Water Tank, and Filter.
Select a firm, level, flat location at least six inches from any wall for proper air flow.
Remove tank and motor housing, remove filter, soak filter in cool water.
Fill tank with cool tap water, do not use hot water, replace fill cap.
Plug into a polarized 120V outlet with the power switch OFF.
Set fan speed for desired humidifying level; turn off if humidity is too high.
Clean base with vinegar or cleaner, rinse thoroughly.
Disinfect water tank and base with bleach solution, rinse until odor is gone.
Do not use chemical solutions on the filter; soak in cool water if clogged.
Use descaler, buy Honeywell filters, empty water when not in use.
Clean humidifier, remove and discard filter, dry completely, store in a cool, dry location.
Check if water level decreases; unit disperses invisible moisture.
Check moisture pad, rinse if dry; check room humidity level.
General| Brand | Kaz |
|---|---|
| Model | HCM-890 Series |
| Category | Humidifier |
| Language | English |
To Next Page
