kchibo KK-9803 User Manual

1
Kchibo KK-9803 User’s Manual
Picture Illustration
1. Antenna 9. Power
2. Frequency Display 10. Band Selector
3. Tuning Indicator 11. Battery Compartment
4. AM Led 12. Hand Strap
5. FM Led 13. D.C. Jack
6. Tuning Switch 14. Earphone Jack
7. AM Button 15. Volume Control
8. FM Button
Radio Operation
1. Install 2 AA batteries into the batteries compartment (11) or use a power adapter
to connect with the D.C. jack(13).
2. Turn on the radio (9).
3. Adjust the volume (15) to the desired level.
4. Press the FM button (8) for FM reception, the FM Led (5) will turn on.
5. Press the AM button (7) for AM/SW reception. User can select AM/SW 1-8 band
through the Band Selector (10). The AM Led will turn on.
6. Rotate the Tuning switch (6) to the desired station.
7. When the signal is strong, the Tuning Led (3) will turn on.
8. User may need to extend the antenna for better reception of FM and SW bands.
9. User may need to adjust the position of the radio for better reception of AM band.
10. When earphone is plugged in, the speaker will turn off automatically.

kchibo KK-9803 Specifications

General

Brand	kchibo
Model	KK-9803
Category	Receiver
Language	English

Summary

Picture Illustration

Radio Operation

Specifications

Frequency

Lists AM, FM, and SW frequency ranges supported by the radio.

Sensitivity

Details the reception sensitivity levels for AM, FM, and SW bands.

Selectivity

Specifies the selectivity rating for signal discrimination.

Speaker

Provides technical details of the radio's speaker.

Power Requirements

Outlines the power source options including batteries and DC input.

Power Consumption

States the typical power consumption of the device.

Output Power

Details the audio output power of the radio.

Physical Dimensions

Lists the physical measurements of the radio.

Weight

Specifies the weight of the radio excluding batteries.