KDK FM-2033 - User Manual

Basic operating parameters can be reset by the user via an initialization module.

Covers speed dialing, RIT, reverse operation, band scanning, and tone oscillator functions.

Details CALL and memory channels, groups, and backup battery.

Describes the LCD display and memory channel indication.

Describes front and rear panel controls, switches, indicators, and connectors.

Details of controls including Function Switch, Dial Knob, Scan Switch, Display, LEDs, Indicators, Mic Connector, Buttons.

Illustrates the top view of the main unit with tone module.

Shows the bottom view of the PLL and control units.

Detailed explanation of the receiver circuit stages.

Detailed explanation of the transmitter circuit stages.

Detailed explanation of the Phase Locked Loop circuit.

Explanation of the CPU control section and its functions.

Procedures for aligning the PLL unit.

Procedures for aligning the receiver section.

Procedures for aligning the transmitter section.

Manual tone operation and changing VFO to endless operation.

Memory backup battery info and microphone circuit diagrams.

Details on scan resume delay and its modification.

General specifications including semiconductors, VFO steps, memories, impedance, voltage, dimensions.

Transmitter specifications including frequency range, power, modulation, deviation.

Receiver specifications including frequency range, IF, sensitivity, selectivity, bandwidth.

List of standard accessories provided with the transceiver.