Keba KeMes A2 Series Brief Description

Technical data
General information
Protection type: IP20
Measurement range: 30° to 150°
Minimum measurement distance: 20 mm to the surface
Resolution: 0.01°
Measurement accuracy: ±0.2°
*)
Repeat accuracy: 0.1°
Power supply: 5 V DC, 500 mA
Battery: 2 integrated LiPo batteries with safety circuits
Nominal battery voltage: 3.7 V
Battery capacity: 2 x 330 mAh
*)
See the operating instructions for a measurement accuracy reference.
Ambient conditions
Operating temperature: +5 °C to +40 °C
Charging temperature: +5 °C to +40 °C
Storage temperature: -20°C to +45°C
Relative air humidity: 5% to 95% (non condensing)
Laser
Laser class: 2 in accordance with IEC 60825-1:2014
Wavelength: 660 nm
Laser output: 7 mW (pulsed)
Laser output calibration uncertainty: ±0.9 mW
Laser beam diameter: 3 mm (at the exit point)
Beam divergence: 35 mrad
Pulse frequency: 167 Hz
IEC 60825-1:2014, Table 10, Condition 3:
200 mm (most restrictive location); 36 µs (impulse
duration in orifice plate)
For a complete list of the technical data, please refer to the operating instructions or
the data sheet.

Keba KeMes A2 Series Specifications

General

Brand	Keba
Model	KeMes A2 Series
Category	Measuring Instruments
Language	English