Next
Home
Back
8
4. Cleaning and disinfection instruction
4.1 Cleaning Tonometer body
• Only manual non-immersion cleaning as described should be
used for this instrument.
• Wipe the external surface with a clean absorbent, non-shedding
cloth dampened with a water / detergent solution (2%
detergent by volume) or water / isopropyl alcohol solution (70%
IPA by volume).
• Use caution to ensure cloth is not saturated with solution.
• Surfaces must be carefully hand-dried using a clean
non-shedding cloth.
• Safely dispose of used cleaning materials.
To Next Page
