EasyManua.ls Logo

Keeper FOREST 1 - Introduction and Uses; Composition and Start-Up; LED Indicators; USB Charging Port

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.gruposanz.es
6
KEEPER FOREST 1
1. INTRODUCTION AND USES
Read this manual carefully before starting to use the sprayer and pay special attention
to the maintenance recommendations, as well as their use for correct operation and
useful life.
The company reserves the rights to changes the composition of the product without
prior notice as well as its technical characteristics. No claims can be derived from the
data and illustrations in this manual. The original manual is written in Spanish, so it will
prevail over the rest, in case of conflict or contradictions between other languages.
This sprayer is specially designed for use in gardening for the application of
phytosanitary products such as fungicides, insecticides or herbicides. In no case
should it be used to spray flammable or industrial products such as solvents, alkalis
or acids.
2. COMPOSITION AND START-UP
Before starting work, check the LED indicator. Red LED indicates that the sprayer
should be charged completely (it could have been discharged during storage).
Watch the product commissioning video through the following link or
QR: www.tiny.cc/startup-forest1
21
LEDs: USB port: type A
Charging / Charge complete
Discharged

Related product manuals