Need help?Do you have a question about the Kees ZKH52220 and is the answer not in the manual?
General| Brand | Kees |
|---|---|
| Model | ZKH52220 |
| Category | Lawn Mower |
| Language | English |
The main pump for the hydraulic system.
Motor for driving the wheels (hydrostatic).
Filter to clean hydraulic fluid.
Tank for storing fuel for the engine.
The main structural frame at the rear of the mower.
Line carrying fuel from tank to engine.
The complete seat unit, including cushion and frame.
The seat cushion, possibly with an integrated safety switch.
The frame used to mount the seat to the mower.
Handle for controlling mower movement, right side.
Arm that actuates the hydraulic pump control.
Spring that helps position the control in neutral.
Shaft that operates the park brake mechanism.
Rod connecting control lever to brake mechanism.
Complete wheel unit including tire, rim, and hub.
Protective shield for the muffler.
Component for engaging or disengaging the drive.
Pulley mounted on the engine crankshaft.
Lever used to operate the deck lift mechanism.
Arm that attaches to the deck for lifting.
The main welded structure of the front frame.
The deck assembly for 61" models, including decals.
The housing that contains the cutting blades.
The cutting blade for the 61 inch deck.
The main electrical wiring harness for the mower.
Switch to start and stop the engine.
Device to track engine operating hours.
Hose used in the modified hydraulic system.
Various fittings used in the hydraulic system.
To Next Page