Need help?Do you have a question about the KEF Blade and is the answer not in the manual?
General| Sensitivity | 90dB (2.83V/1m) |
|---|---|
| Impedance | 4 Ohms (min. 3.2 Ohms) |
| Amplifier Requirements | 50-400W |
| Maximum Output | 117dB |
| Nominal Impedance | 4 Ohms |
| Design | Four-way bass reflex |
| Type | Floorstanding |
| Drive Units | Uni-Q driver array: HF: 25mm (1in) vented aluminium dome, MF: 125mm (5in) aluminium; LF: 4 x 225mm (9in) aluminium |
| Harmonic Distortion | <0.5% 40Hz - 100kHz |
Read manual, follow unpacking, secure cables, use proper tools, and avoid direct electrical connection.
Avoid temperature extremes, damp, and direct sunlight. Clean with KEF cloth, avoid spirit cleaners.
Instructions for unpacking, inspecting for damage, and retaining packaging for KEF Blade speakers.
Guidance on leveling KEF Blade speakers using spikes and locking nuts for stability and optimal performance.
Guidelines for positioning speakers and managing room acoustics for best stereo image and sound.
Details on connecting KEF Blade speakers to an amplifier using various terminal types and cable quality.
Information on suitable amplifier power outputs and precautions for power handling to avoid damage.
Explanation of different speaker cable connection methods: single, bi-wire, and bi-amp for KEF Blade speakers.
Description of KEF Blade speaker specs: drive units, frequency response, sensitivity, impedance, dimensions, and finishes.
To Next Page
