Do you have a question about the KEF C7 and is the answer not in the manual?
Woofer | No |
---|---|
Tweeter | Yes |
Tweeter diameter | 19 mm |
Number of drivers | 3 |
Speaker enclosure | Reflex |
Speaker placement | Floor |
Audio output channels | 2.0 channels |
Mid-range driver diameter | 165 mm |
Tweeter diameter (imperial) | 0.75 \ |
Mid-range driver diameter (imperial) | 6.5 \ |
Product color | Walnut |
Housing material | - |
Recommended usage | Speaker set unit |
Amplifier output power | 200 W |
Impedance | 8 Ω |
Sensitivity | 91 dB |
Frequency range | 36 - 40000 Hz |
Crossover frequency | 2500 Hz |
Depth (imperial) | 11.25 \ |
Width (imperial) | 8 \ |
Height (imperial) | 38 \ |
Weight (imperial) | 29.5 lbs |
Dimensions (WxDxH) | 203 x 286 x 965 mm |
Dimensions (W x D x H) (imperial) | 8 x 11.25 x 38 \ |
Connectivity technology | Wired |
Power source type | AC |
Depth | 286 mm |
---|---|
Width | 203 mm |
Height | 965 mm |
Weight | 13400 g |
Details on key technologies like the 'tangerine' waveguide tweeter, rigid enclosures, gold-plated terminals, dual signal transmission, slot port, and invisible mounting system.
Technical details for the C7 floorstander, including drive units, frequency response, impedance, sensitivity, and dimensions.
Technical details for the C5 floorstander, including drive units, frequency response, impedance, sensitivity, and dimensions.
Technical details for the C3 bookshelf, including drive units, frequency response, impedance, sensitivity, and dimensions.
Technical details for the C1 bookshelf, including drive units, frequency response, impedance, sensitivity, and dimensions.
Technical details for the C6LCR centre channel speaker, including drive units, frequency response, impedance, sensitivity, and dimensions.
Technical details for the C4 powered subwoofer, including amplifier, power handling, frequency response, and dimensions.