Do you have a question about the KEF HTC3001 and is the answer not in the manual?
design | Bass reflex two-way |
---|---|
drive unit array | 115mm (4.25in.) Uni-Q |
frequency range | 70Hz - 55kHz |
amplifier requirement | 10 - 100 Watts |
---|---|
sensitivity | 88dB |
maximum output | 104dB SPL @ 1m |
impedance | 8Ω |
---|---|
internal volume | 1.75 litres |
weight | 3kg (6.6lbs) |
dimensions (H x W x D) | 198 x 130 x 150 mm (7.8 x 5.1 x 5.9 in.) |
---|---|
finish | High Gloss Black & High Gloss Silver |
crossover frequency | 2.2kHz |
design | Closed box three-way |
---|---|
drive unit array | 115mm (4.25in.) Uni-Q 19mm (0.75in.) aluminium HF 2 x 75mm (3in.) LF |
frequency range | 60Hz - 55kHz |
amplifier requirement | 10 - 100 Watts |
---|---|
sensitivity | 90dB |
maximum output | 106dB SPL @ 1m |
impedance | 8Ω |
---|---|
internal volume | 2.4 litres |
weight | 6kg (13.2lbs) |
dimensions (H x W x D) | 198 x 130 x 150 mm (7.8 x 5.1 x 5.9 in.) |
---|---|
finish | High Gloss Black & High Gloss Silver |
crossover frequency | 2.2kHz / 500Hz |