KEF IQ10 User Manual

Part No.K290223ML
Issue 2: August 2008
5
GP Acoustics (UK) Ltd., Eccleston Road,Tovil, Maidstone, Kent, ME15 6QP U.K.
Tel: + 44 (0)1622 672261 Fax: + 44 (0)1622 750653
GP Acoustics (US) Inc., 10 Timber Lane, Marlboro, New Jersey 07746 U.S.A.
Tel: +(1) 732 683 2356 Fax: +(1) 732 683 2358
GP Acoustics GmbH, Am Brambusch 22, D-44536 Lünen, Deutschland.
Tel: +49 (0) 231 9860-320 Fax: +49 (0) 231 9860-330
GP Acoustics (France) SAS, 39 Rue des Granges Galand - BP60414,
37554 Saint Avertin CEDEX, France.
Tel : +33(0)2 47 80 49 01 Fax: +33(0)2 47 27 89 64
GP Acoustics (HK) Limited, 6F, Gold Peak Building, 30 Kwai Wing road,
Kwai Chung, N.T., Hong Kong.
Tel : +852 2410 8188 Fax: +852 2401 0754
KEF JAPAN 1-11-17, Honcho, Koganei-City, Tokyo, JAPAN 184-0004
Tel: +81 (0)42-388-2030 E-mail: info@kef.jp
www.kef.com
KEF and Uni-Q are registered trademarks. Uni-Q is protected under GB patent 2 236929, U.S. Pat. No. 5,548,657 and other worldwide patents.
KEF reserve the right, in line with continuing research and development, to amend or change specifications.
Design Two-way bass reflex Two-way bass reflex Two and a half-way bass reflex Two and a half-way bass reflex Three-way bass reflex
Drive units
130mm (5.25in.) Uni-Q 165mm (6.5in.) Uni-Q 130mm (5.25in.) LF 165mm (6.5in.) LF 2 x 165mm (6.5in.) LF
19mm (0.75in.) alu dome HF 19mm (0.75in.) alu dome HF 130mm (5.25in.) Uni-Q 165mm (6.5in.) Uni-Q 165mm (6.5in.) Uni-Q
19mm (0.75in.) alu dome HF 19mm (0.75in.) alu dome HF 19mm (0.75in.) alu dome HF
Frequency response 50Hz - 40kHz 45Hz - 40kHz 40Hz - 40kHz 36Hz - 40kHz 33Hz - 40kHz
Crossover frequency 2.5kHz 2.5kHz 2.5kHz 2.5kHz 180Hz - 2.5kHz
Amplifier requirements 10-100W 15-120W 15-130W 15-150W 15-200W
Sensitivity (2.83V/1m) 88dB 89dB 88dB 90dB 91dB
Maximum output 108dB 110dB 109dB 111dB 113dB
Nominal impedance 8Ω 8Ω 8Ω 8Ω 8Ω
Magnetic shielding Yes Yes Yes Yes Yes
Weight 4.5kg (9.9lbs) 6.45kg (14.2lbs) 10.2kg (22.5lbs) 14kg (30.9lbs) 16.3kg (35.9lbs)
Dimensions 301 x 175 x 261 mm 365 x 220 x 327 mm 815 x 175 x 261 mm 865 x 220 x 327 mm 942 x 220 x 327 mm
H x W x D 11.8 x 6.9 x 10.3 in. 14.4 x 8.7 x 12.9 in. 32 x 6.9 x 10.3 in. 34 x 8.7 x 12.9 in. 37 x 8.7 x 12.9 in.
Plinth Dimensions N/A N/A 28 x 250 x 295 mm 28 x 288 x 348 mm 28 x 288 x 348 mm
H x W x D 1.1 x 9.8 x 11.6 in. 1.1 x 11.3 x 13.7 in. 1.1 x 11.3 x 13.7 in.
Design Three-way bass reflex
Drive units
2 x 130mm (5.25in.) LF
130mm (5.25in.) Uni-Q
19mm (0.75in.) alu dome HF
Frequency response 65Hz - 40kHz
Crossover frequency 280Hz - 2.8kHz
Amplifier requirements 15-150W
Sensitivity (2.83V/1m) 90dB
Maximum output 111dB
Nominal impedance 8Ω
Magnetic shielding Yes
Weight 8.8kg (19.4lbs)
Dimensions 165 x 512 x 255 mm
H x W x D 6.5 x 20.1 x 10 in.
Installation Manual
Manuel d’installation
Installationshandbuch
Manuale d’installazione
Manual de instalación
Manual de instalação
Installatiehandleiding
Installationsanvisning
Podręcznik instalacji
GB
I
F
D
NL
ES
DK
P
PL
JP
RU
GR
K
CN
TC
(GB) Specifications
(F) Spécifications
(D) Technische Merkmale
(I) Specifiche
(ES) Especificaciones
(P) Especificações
(NL) Technische gegevens
(DK) Specifikationer
(PL) Specyfikacja techniczna
(RU)
(GR)
(JP)
(CN)
(TC)
(K)
K7269_iQ08_Combined.qxd 17/9/08 12:42 Page 2
Инструкция по установке
Εγχειρίδιο Εγκατάστασης
取り扱い説明書
安装手册
安裝手冊
설치방법
iQ Manual_II-Rev02.indd 1 2008-9-24 11:50:18

KEF IQ10 Specifications

General

Brand	KEF
Model	IQ10
Category	Speaker System
Language	English

Summary

KEF Q Series Introduction

Product Lineup

Displays the range of KEF Q Series speakers including iQ90, iQ70, iQ50, iQ30, iQ10, and iQ60c.

Speaker Setup and Safety

Plinth and Pedestal Identification

Identifies speaker plinths and pedestals across different models and languages.

Initial Installation Guidance

Guides users to follow the manual for best results and handle the warranty card.

Environmental Warnings

Alerts users to avoid extreme temperatures for speaker operation.

Speaker Care and Environment

Environmental Protection

Details proper care regarding moisture, sunlight, and cleaning agents.

Cable Safety Procedures

Stresses the importance of securing all cables to prevent tripping hazards.

Speaker Placement

Floor Placement Options

Illustrates recommended floor placement for various KEF Q Series speaker models.

iQ10 Wall Mounting

Shows specific wall mounting instructions and hardware for the KEF iQ10 speaker.

Room Acoustic Optimization

Room Layout and Listening Zones

Depicts optimal speaker placement within a room layout, defining listening zones.

Speaker Connectivity

Single Wire Connection Guide

Illustrates how to connect speakers using a single wire to the amplifier.

Bi-wired Connection Guide

Details the process for connecting speakers using bi-wiring techniques.

Bi-amplified Connection Guide

Explains how to connect speakers for bi-amplification setup.

iQ60c Connectivity

iQ60c Single Wire Setup

Illustrates single wire connections for the KEF iQ60c center speaker.

iQ60c Bi-wired Setup

Details bi-wired connections for the KEF iQ60c center speaker.

iQ60c Bi-amplified Setup

Explains bi-amplified connections for the KEF iQ60c center speaker.

Troubleshooting Speaker Issues

Problem Diagnosis and Resolution

Provides a structured guide to diagnose and resolve common speaker problems.

Frequency Response Troubleshooting

Details troubleshooting steps related to HF, MF, and LF sound reproduction.

Sound Quality Troubleshooting

Addresses issues like intermittent sound and distorted sound, offering causes and solutions.

Technical Specifications

Speaker Model Specifications

Presents detailed specifications for each KEF Q Series speaker model.

Company Contact Information

Lists contact details for KEF customer support and offices worldwide.