KegLand Mini 360 User Manual

Mini 360 Core Actuator Regulator Instruction Manual
Page 8 of 14 www.KegLand.com.au Last Updated 4/08/2020 11:09 AM
Swapping the mini gauge
If you wanted to install a mini gauge with a different pressure range to the default 0-60 psi mini
gauge then follow these steps:
Step 1. Unscrew the two socket head cap screws which hold the mini gauge cover in position
and remove the mini gauge cover.
Step 2. Pull on the face of the gauge to remove it.
Step 3. Push the replacement gauge into the regulator and screw the gauge cover back on.
Different pressure mini gauges can be found here:
 Mini Gauge 0-23 PSI (KL14984)
 Mini Gauge 0-30 PSI (KL14991)
 Mini Gauge 0-150 PSI (KL15011)

KegLand Mini 360 Specifications

General

Brand	KegLand
Model	Mini 360
Category	Controller
Language	English