Need help?Do you have a question about the KegLand RAPT Pill KL20596 and is the answer not in the manual?
General| Brand | KegLand |
|---|---|
| Model | RAPT Pill KL20596 |
| Category | Measuring Instruments |
| Language | English |
Details the behavior of the red LED for charging status and battery insertion.
Explains the green LED status when the device is not connected to USB-C.
Explains the green LED status when the RAPT Pill is connected to USB-C.
Steps to create a RAPT account for device tracking and monitoring.
Instructions for connecting to the RAPT Pill's temporary Wi-Fi network.
Guide on accessing the RAPT Pill's configuration portal via Wi-Fi.
Process for connecting the RAPT Pill to your home Wi-Fi network.
Procedure to check for and install the latest firmware updates.
Steps to link the RAPT Pill to your RAPT account via the cloud portal.
Screen for selecting and connecting to a user WiFi network.
Section to view MAC Address and Validation Code for device registration.
Configure telemetry method, interval, and temperature offset settings.
View real-time telemetry, check firmware, send logs, reboot, and factory reset.
Location within the captive portal to access calibration functions.
How the RAPT Pill enters and exits sleep mode based on orientation.
Steps for calibrating the RAPT Pill before first use and recalibration.
Quickest and simplest method for calibrating the RAPT Pill using a known gravity liquid.
Method for greater accuracy, requiring two known gravity liquids.
Advanced method for highest accuracy, requiring multiple gravity points and data analysis.
Instructions to enable Bluetooth/Wi-Fi and set telemetry method and interval.
Troubleshooting steps for when the red charging LED does not light up.
Troubleshooting steps for when the green LED fails to flash.
Steps to resolve issues with the validation code not appearing in the captive portal.
Troubleshooting steps for when telemetry data is not received by the RAPT Portal.
Check the RAPT Pill's Wi-Fi connection status for telemetry issues.
Verify that the RAPT Pill is running the latest firmware version.
Assess the Wi-Fi signal strength for reliable telemetry transmission.
Troubleshooting for rapid red flashing light indicating battery connection issues.
To Next Page
