Keithley 2260B-80-13 - Page 79

2260B Series User Manual
76
Setting the Test Sequence Settings
Steps
The test sequence settings (T-01~T-04) are set
with the Utility key.
1. Press the Utility key. The Utility
key will light up.
2. The display will show T-01 on the top and the
memory no. for T-01 on the bottom.
Test Sequence
Setting
Memory
number
3. Rotate the voltage knob to select
below items.
Voltage
Test sequence Run
Test sequence Load
Test sequence Export
Test sequence Remove
T-01
T-02
T-03
T-04
4. Rotate the current knob to choose a
memory slot number.
Current
Range
1~10
5. Press the Voltage knob to complete
the setting.
Voltage