Keithley 263 Quick Reference Guide

HP SERIES 300 and 9818
The following program sends a command string to the
Model 263 from a Hewlett-Packard Ssries 300 or Model
9816 computer and displays the inwument reading strina
on the computer CRT. The computer mwt be equipped with
the HP62937 GPIB Interface and SASICA 4.0.
DIRECTIONS
1. Using the front panel program feature, set the primary
address of the Model 283 to 8.
2. With the power off, connect the Model 203 to the
HPS2937A GPIB interface installed in the computer.
3. Enter the lines In the program below, using the ENTER
key after each line.
4. Press the RUN key end type in the desired command
string at the command prompt. For example, to place tha
instrument in the current function and 200~A range, type
I” FlA9X and press the ENTER key.
6. The instrument resdlng string will then appew on the
CRT.
32

Keithley 263 Specifications

General

Brand	Keithley
Model	263
Category	Test Equipment
Language	English