Keithley 263 Quick Reference Guide

HP 9825A
Use the fcllowlng~prcgrsm to send a command string to
the Model 263 from a Hewlett-Packard Model 9826A and
display the instrument reading string on the computer
printer. The computer must be equipped with the
HP99034A HP16 Interface and a 9972A extended I/O ROM.
DIRECTIONS
1. From the front panel, set the primary address of the Model
263 to 13.
2.With the power off, connect the Model 263 to the
99034A HPIB interface installed in the 992SA.
3.Enter the lines in the program below, using the STORE
key after each line Line numbers are automatically assign-
ed by the 9926A.
4.Press the 982SA RUN key and type in the desired ccm-
msnd string at the command prompt. For example, to
place the Instrument in the current function and ZOOpA
range. type in FlR9X and press the CONT key.
&The instrument reading string will then appear on the
computer print cut.
34

Keithley 263 Specifications

General

Brand	Keithley
Model	263
Category	Test Equipment
Language	English